0
0 items
$0.00
No products in the cart.
- DC voltage up to 10kV
- Automatic measuring bridge pre-location
- Pulsed voltage for pinpointing
- IP54 protection for outdoor use
- Measurement Range: 10 m – 250 km.
- Resolution: 0.1 m.
- Power Source: Mains or rechargeable battery.
- Weight: Approx. 7.7 kg (device only).
- Up to sixteen acoustic sensors
- Fiber optic cable to 200 meters
- Three operational modes available
- Embedded LCD with time stamps
- Battery operated for up to 6 hours
- PD input sensitivity: below 150 μV
- Remote software control via Bluetooth
- Cable fault location precision: 1 meter
- Length measuring range: 1280 kilometers
- Touchscreen display: 15.6 inches, Full HD
- Dynamic range: 115 decibels
- Pulse voltage: Up to 160 volts
- Measuring Range: 0–25,000 ft continuous
- Pulse Width: 50 ns to 10 μs
- Accuracy: ≤2.5 feet repeatability
- Sampling Rate: 100 MHz high precision
- Maximum range: up to 20 km
- Minimum resolution: 0.1 meter
- Dual channel trace display
- Selectable impedance: 25-125 Ohms
- 2 ns Pulse Width Precision
- Four Selectable Output Impedances
- Resolution Down to 0.1 Meter
- Maximum Range of 5,000 Meters
- Indicates fault direction
- Works in all weather
- Survives rough handling
- Long-lasting 9-volt battery
- Directly couples live cables
- Locates faults up to 150 kΩ
- Pulsed output for detection
- Filters large interference
- Wide Active Frequencies
- Exceptional Dynamic Range
- High Depth Measurement
- Lightweight Sensor Design
- Detects combustion gases.
- Battery life: >10 hours.
- Two-sensor technology.
- Graphical LCD display.
- Dual Channel Operation
- 0.1m Resolution
- IP54 Environmental Rating
- Li-ion Rechargeable Battery
- Load current max. 250 A
- Fault location with consumers
- Automatic power supply restart
- Real-time current and voltage
- Highly sensitive detection
- Automatic voltage adaptation
- Filters interfering signals
- Automatic zero calibration
Recently Viewed Products
- Insulation Range: 100 GΩ Max
- Voltage Measurement: 600 V AC/DC
- Continuity Range: 0.01 Ω - 1 MΩ
- Weather Rating: IP54 Protected
- Accuracy: 0.01% of reading
- Functions: mA, V source/measure
- Display: mA and % span
- Features: HART resistor, ramp
- Selectable Test Voltages: 100V, 250V, 500V, 1000V DC
- Insulation Resistance Range: Up to 2000 MΩ
- Ohm Range: Up to 5000 Ω
- Portable and Hand-Cranked: Self-contained operation
- FieldSense non-contact voltage measure
- Simultaneous voltage current reading
- Industry-widest open fork
- True-rms accurate measurements
- Up to 12 kV test voltage
- Full suite of static tests
- Intuitive 8-inch color touchscreen
- Coil mode for rapid testing
Join our newsletter for £10 offs
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!

Industrial Instrumentation Supplier
Fair Pricing, Guarantee of Authenticity and Quality, Fast Delivery, and Provision of Technical Support to Customers.
Need Help?
Customer Service
Store Information
- -5% for all order in this week Shop now
- Free delivery for all orders over $200




















